KL 260T Fusion Splicer

☆ Both X and Y axis display
☆ Large multiple & visible fiber core
☆ Turnover display screen to use conveniently
☆ Inner light to set fiber at night
☆ Auto check end-face of fiber
☆ Auto calculate splicing loss
☆ Auto select suitable fusion program
☆ Small bulk and light weight
☆ Alternating /Direct Current available
☆ Concave weatherproof cover& Max. wind velocity of 15m/s
☆ Inner Li-battery to use conveniently
               
Specifications:
Applicable range  
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) CS and ED
SM cord 4-14µm, MM cord 50,62.5µm ; 125µm outer diameter (standard)
Fiber cleaved length: 16mm
Average splicing loss: 0.01dB MM/0.02dB SM (standard measure)
Typical splicing time: 9s, typical heating time:60s, return loss > 60dB
Fusion program
10 units factory setting program, 10 units user setting program
Heater    Inner heater, optional outer heater, can heat 4 protecting sleeves at same time
Heater time is 30 seconds
Screen display
Both X and Y axis display, display current time and date, display current work mode
Appearance:  172mm(length) x180mm (width) x150mm (height)
Screen:       5 inches LCD Monitor             Weight:  4.6Kg
Work mode
Program/Splicing/Heating: Automation or manual optionally
Storage of splicing result: The last 5000 results to be stored in the internal memory
RS 232 interface: Connect with computer for transmitting data, printing and storage
Environment
Temperature: -10～50℃                    Storage:-40～60℃
Humidity: <95%RH (without dew)            Storage humidity: without dew
Work altitude: 0~4000 meters
Max. wind velocity of 15m/s
Power supply
Alternating Current: 220V+15% 50Hz  30W      Direct current:10～13V   25W 
Inner Li-ion battery and AC adaptor